Need help?Do you have a question about the SEW MOVITRAC MC07B0110-5A3-4-00 and is the answer not in the manual?
General| Model | MOVITRAC MC07B0110-5A3-4-00 |
|---|---|
| Power Rating | 1.1 kW |
| Frequency Range | 0-400 Hz |
| Control Method | V/f control, vector control |
| Protection Class | IP20 |
| Weight | 2.5 kg |
| Output Power | 1.1 kW |
| Ambient Temperature | -10 to 50 °C |
| Storage Temperature | -25 to 70 °C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Installation Altitude | Up to 1000m above sea level |
| Communication Interface | RS485 |
Explains the structure of safety notes, including signal words and their meanings.
General warnings about product handling, damage, and potential hazards during operation.
Specifies qualified electricians as the authorized personnel for handling the units.
Defines the intended use of frequency inverters in electrical systems or machines.
Describes the increasing use and features of speed-variable AC drives with inverter technology.
Illustrates the system components and connections within the MOVITRAC® B.
Details unit properties, voltage range, overload capacity, speed range, and frequency ranges.
Overview of the MOVITOOLS MotionStudio program and its functions.
General technical specifications for MOVITRAC® B regarding interference, temperature, and climate.
Specifies terminal assignments, default settings, and data for various inputs and outputs.
Explains fieldbus gateways for connecting to SEW SBus and supported protocols.
Details the DFP21B option for PROFIBUS DP/DP-V1 connection, including electronics data.
Explains the DFD11B option for DeviceNet connection and its electronics data.
Details the DFE24B option for EtherCAT connection and its electronics data.
Explains the DFE32B option for PROFINET IO RT connection and its electronics data.
Details the DFE33B option for EtherNet/IP connection and its electronics data.
Explains the DFS11B option for PROFIBUS/PROFIsafe connection and its electronics data.
Introduces parameter setting methods and explains parameter symbols and motor startup.
Explains control functions, operating modes (VFC, V/f), and DC braking.
Introduces the PI controller and its parameterization for temperature, pressure, or other applications.
Lists parameters, indicating those displayable/editable via keypad and factory settings.
Outlines the systematic steps for project planning, from clarification to component selection.
Explains the speed-torque characteristic curve and its interpretation for motor selection.
Provides recommendations and tables for selecting motors and their combinations with inverters.
Explains how inverters calculate load and factors affecting permitted continuous current.
Provides guidance on selecting braking resistors, including parallel connection and power calculation.
Covers permitted voltage supply systems, grounding, contactors, and fuses.
Outlines the basic procedure for connecting the inverter to a motor and control system.
Prerequisite for successful startup and safety warnings for hoist applications.
Lists preliminary steps for basic unit and keypad startup, including safety precautions.
Step-by-step guide for startup using the FBG11B keypad, including motor selection.
Guides for startup using the DBG60B keypad, including motor type and operating mode.
Step-by-step guide for performing startup using the DBG60B keypad.
Lists essential data required for successful motor startup.
Details analog setpoint specification and shows signal presence on terminals for drive operation.
Lists MOVITRAC® B return codes and their meanings, including parameter lock and faults.
Explains fault memory and switch-off responses based on different faults.
Provides a list of faults, their designation, response, possible cause, and measures.
To Next Page