Need help?Do you have a question about the SGB VLR 410/E and is the answer not in the manual?
Alarm indicating the status of system tightness.
Defines the product type and its available versions.
Outlines the intended uses and conditions for the leak detector.
Specifies conditions for interstitial space suitability.
Details the materials that can be conveyed and monitored.
Defines material resistance requirements for detector components.
Classifies pipes based on pressure ratings (5 or 25 bar).
Describes the standard operational cycle of the leak detector.
Explains the detector's response and behavior during air leaks.
Details the detector's behavior and alarm triggers for liquid leaks.
Specifies alarm and pump activation/deactivation thresholds in mbar.
Explains the functions of the device's indicators and controls.
Details the meaning of various signal lamp states and their combinations.
Provides essential safety and preparatory notes for installation.
Guidelines for physically installing the leak detector unit.
Instructions for connecting pneumatic lines and fittings.
Detailed instructions for making electrical connections to the device.
Procedures for initial system activation and setup.
General guidance for operating the leak detection system.
Basic principles for operating the leak detection system correctly.
Details routine maintenance procedures and schedules.
Procedures for testing the device's functionality and safety.
Procedures for responding to and handling alarm signals.
General| Brand | SGB |
|---|---|
| Model | VLR 410/E |
| Category | Security Sensors |
| Language | English |
To Next Page
