SGL Smarty - Advanced Settings and Features; Temperature Setting

26
EN
TEMPERATURE SETTING
To enter the temperature setting mode, proceed as follows:
• Switch on the machine;
• Touch for 3 seconds (continuous pressure) the coffee
dispensing buttons (the machine emits a "beep" sound):
▪ ⓫ for the Manual version.
▪ ❹ for the Automatic version.
NOTE: The machine set up permits to set the
temperature on 3 levels, at intervals of 3°C (3°C,
Standard, +3°C).
MANUAL version.
Once having entered temperature setting, select by means
of the coffee dispensing button ⓫.
AUTOMATIC version
Once having entered temperature setting, select by means
of the short coffee ➌ or long coffee dispensing button ❹.
The three temperature levels are shown by the Blue and/or
red LED, as follows:
TEMPERATURE LEVEL LED
Minimum Blue (steady light on)
Standard Blue and red (steady light on)
Max Red (steady light on)
The temperature level changes every time the coffee dispensing button is pressed.
MANUAL
version
15
MANUAL
Version
AUTOMATIC
Version
MANUAL
version
16
MANUAL
Version
AUTOMATIC
Version