PAGE 45
The oil flow adjusting screw must be pressed in slightly
in order to turn. Failure to do so could damage the
pump and screw.
3. With a screwdriver, push in the oil flow rate adjusting
screw and turn in the desired direction (there are three
incremental settings):
(a) Clockwise-decrease lubrication
(b) Counter clockwise-increase lubrication
(c ) Middle
• Always wear work gloves made of leather or sturdy material
when using the polesaw.
• Falling branches may fall onto the face or into the eyes,
resulting in injuries, scratches, and cuts, and for this reason
you should always be sure to wear a helmet and face
protector when using your polesaw.
OPERATION
WARNING
WARNING
To Next Page
Loading...