Shad SH40 User Manual

PARTS
ASSEMBLY INSTRUCCIONS
Once the adaptor has been assembled you are then ready to t the TOP CASE. 1
- Put the key in and leave in the vertical position. Slot the rear
tongue into the adaptor groove. Fit the front anchorage into its housing. WARNING. It is important to ensure that the case is properly xed to the
adaptor. Make sure you hear the click of the pin as it goes in and that the front opening lever is correctly positioned (Fig. F). 2
- To open the
TOP CASE, insert the key in the vertical position. Operate the locking mechanism as shown in Fig. G. Turning the key in a clockwise direction will
lock the TOP CASE so that it can neither be opened nor detached from the adaptor. The key can be removed in either the locked o r unlocked
position. 3
- To remove the TOP CASE, insert the key in the vertical position, hold the case by the handle, operate the lower part of the opening
mechanism and lift up gently until the anchorage comes out of the case. Then pull to remove the upper tongue from the adaptor groove (Fig. H).
SH40-45-46
Fig. G
SH40-45-46
Fig. H
Fig. F
1.
SH40 CARGO
1
2
3
Α:
.tnaC.feR.soP
48505031
42314032
.tnaC.feR.soP
44250023
The maximum load of the case is of:
SH40 - SH40 CARGO: 4 kg
SH42 - SH45 - SH46: 6 kg
CARGO

Shad SH40 Specifications

General

Capacity	40 liters
Water Resistance	Yes
Type	Top Case
Waterproof	Yes
Color Options	Black
Material	Polypropylene
Compatibility	Universal

Summary

Top Case Assembly and Usage

Fitting the Top Case

Attach the top case to the adaptor, slotting the rear tongue and fitting the front anchorage securely.

Operating the Locking Mechanism

Instructions on using the key to lock or unlock the top case, ensuring it is fixed to the adaptor.

Removing the Top Case

Steps to remove the top case, including inserting the key, operating the mechanism, and lifting.

Maximum Load Specifications

Specifies the maximum weight load for SH40, SH40 CARGO, SH42, SH45, and SH46 models.

Rack D1B40PA Assembly

Rack Mounting Procedure

Step-by-step guide for fitting the TOP CASE bottom rack onto the motorcycle's packet-holder.

Securing Rack Components

Instructions on fastening the rack using screws, rectangular washers, flanges, washers, and nuts.

Cover Installation

Guidance on fitting covers by bending them slightly to insert the tongues.

Rack Usage Compatibility

Indicates that the rack can only be used on the Top or Full master configurations.

Technical Details Overview

Design and Capacity

Details on product design origin, maximum load capacity, and helmet storage.

Key Features

Highlights features like Press Lock System, included D1B40PA plate, and impact resistance.

Sealing and Accessories

Information on waterproof sealing, optional backrest, and optional brake light accessories.

Product Measurements

Provides the specific width, height, and depth dimensions of the product.