- 9 -
SPECIFICATIONS
Physical
Length .............................................................................15.75” (400 mm)
Width ............................................................................. 7.54” (191.4 mm)
Height ............................................................................8.21” (208.41 mm)
Dry weight ...........................................................................11.9 lbs (5.4 kg)
Performance
Operating time ..........................................................................continuous
Warm up time ............................................................................8 minutes
Control and programming
Control options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote
Fluid system
Capacity ...................................................................................... 1 litre
Fluid consumption ....................................................................1 litre / hour
Connections
Remote ..........................................................................................IEC
AC power .......................................................................................IEC
Electrical
AC voltage ....................................................................120V / 230V, 50/60Hz
Thermal
Maximum ambient temperature .........................................................40°C (104°F)
Exterior surface temperature, steady state, at 20°C ambient ...............................40°C (104°F)
Approvals ...................................................................ETL approval (pending)
Information in this document is subject to change without notice and does not represent a commitment on the part of
Tempest Technology Corp.
To Next Page
Loading...