- 8 -
MAINTENANCE
Before servicing the Shadow Dusk, read and observe all the precautions listed in the Important Safe-
guards section on pages 2-4 of this manual. Note: Any service that is NOT described in the section below
must be carried out by a Rosco service technician. Contact Tempest for more information on your repair and
service needs.
Exterior Cleaning
Excessive dust, fluid residue, and dirt build-up will degrade the performance of the machine and may
cause overheating to occur. To maintain adequate air flow and cooling, the outer casing and air vents
of the machine must be cleaned periodically. Damage caused by lack of cleaning is not covered by the
product warranty.
• Unplug the machine from power and allow the unit to cool completely before cleaning. Note: The
output nozzle may remain hot for up to 10 hours after use.
• Remove dust from the air vents with a soft brush, cotton swab, vacuum or compressed air.
• Clean any fluid residues from the fog output area of the machine using a damp cloth.
• Clean the outer casing with a damp cloth only.
Storage & Shipment
Before storing the machine for an extended period of time, ensure the following:
• Fluid bottle has been removed and securely capped
• Proper cleaning of exterior as described above
• Machine is properly boxed or covered to avoid dust build up on internal components
• If shipping, use original packaging or comparable protection to avoid damaging the machine
in transit
To Next Page
Loading...