EasyManuals Logo

Shanling M0 User Manual

Shanling M0
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Headphone Output Interface
The interface is a standard 3.5mm headphone jack.
TF Card Port
1. The port is only for the standard TF card(Micro SD) and supports a
capacity up to 512GB.
RESET Button
This button is for system reset. After pressing it, the system will reboot
automatically.
USB Port
2. Digital audio signal transmission
a. After booting up the device and entering the System interface,
select the "USB Mode" option and set to the "DAC" status.
" "
1. Data exchanging
a. After booting up the device and entering the System interface,
select the "USB Mode" option and set to the "USB" status.
" "
b. After connecting to a computer, user can start to manage songs
on the TF card.
2. Open the TF card cover, insert the TF card into the card slot in the
indicated direction and press it gently until it locks inside. Press again
to remove the card.
c. After disconnecting device from a computer, in the "System" select
"Update Music", select "Now" and confirm the update. After
update, the TF card's songs will appear in "My Music".

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shanling M0 and is the answer not in the manual?

Shanling M0 Specifications

General IconGeneral
Display1.54 inch touchscreen
DACESS Sabre ES9218P
Output Power80 mW @ 32Ω
Battery LifeUp to 15 hours
BluetoothBluetooth 4.1
Weight38g
Battery630 mAh
Output Impedance0.16Ω
Charging Time2 hours
Storage512GB
USBUSB Type-C
Supported formatsFLAC, WAV, WMA, MP3
Audio FormatsDSD, FLAC, WAV, WMA, MP3, AAC, OGG
Bluetooth CodecSBC, aptX
Max Storage512GB
Resolution240 x 240 pixels
THD+N0.004% (A-Weighting, Output 500mV)

Related product manuals