Need help?Do you have a question about the Shanling UA2 and is the answer not in the manual?
General| Output Power | 125mW @ 32Ω |
|---|---|
| DAC Chip | ESS ES9038Q2M |
| Connector | 3.5mm Single-Ended |
| USB Interface | USB-C |
| Weight | 12.6g |
| THD+N | 0.0008% |
| Output Impedance | ≤1Ω |
| PCM Support | 32bit/768kHz |
| DSD Support | DSD256 |
| Frequency Response | 20Hz-40kHz (-0.5dB) |
Do not repair, use in extreme environments, adjust volume properly, and avoid chemical cleaning to protect the device.
Identifies key components such as headphone outputs, status indicator, and connectors.
Explains plug-and-play for Win10/Mac OS and driver download for older Windows versions, noting Android compatibility.
Instructions for switching to UAC 1.0 mode for specific devices like game consoles or older Android devices.
Details USB power consumption and normal heat generation during operation.
Requires a special USB-C to Lightning cable for iOS devices.
Provides detailed specifications for the 3.5mm single-ended headphone output, including power, frequency response, and impedance.
Details specifications for the 2.5mm balanced headphone output, covering power, frequency response, and impedance.
To Next Page
