Need help?Do you have a question about the Shanling UP4 and is the answer not in the manual?
General| DAC Chip | Dual ESS ES9218P |
|---|---|
| Bluetooth Version | 5.0 |
| Charging Time | 2 hours |
| Battery Capacity | 550mAh |
| Outputs | 3.5mm Single-ended, 2.5mm Balanced |
| Charging Port | USB-C |
| Weight | 37g |
| Bluetooth Codec Support | LDAC, aptX HD, aptX, AAC, SBC |
| THD+N | 0.003% |
| SNR | 120dB (Balanced) |
| Battery Life | 15 hours |
| Dimensions | 60mm x 36mm x 13.5mm |
Covers repair, environment, handling, cleaning, and audio volume.
Addresses battery replacement risks, heat exposure, and charging practices.
Specifies using certified power adapters.
Lists components and their hazardous material content.
Explains the meaning of symbols used in the substances table.
Details the Type-C USB, 3.5mm, and 2.5mm headphone jacks.
Identifies the volume wheel, multifunctional button, status indicator, and NFC sensor.
Procedures for device power states.
Steps for pairing devices via Bluetooth and NFC.
Covers successful connections, disconnections, and timeouts.
How to connect to two devices simultaneously.
Controls for skipping tracks and play/pause.
Managing incoming calls and answering.
Switching, ending, and refusing calls during operation.
How to control volume and switch between device modes.
Using the device as a USB Digital-to-Analog Converter.
Instructions for updating the device's firmware.
Explains indicator lights for Bluetooth codecs.
Details available gain modes and their indicator lights.
Explains options for digital filters and their indicators.
Describes indicator lights for charging and low battery states.
Addresses frequently encountered problems and their solutions.
Lists items included in the product package.
To Next Page
