Power ON / OFF / Standby
Operation Instructions
1. Power on: Press and hold the multifunctional button for 3 seconds,
the Shanling UP4 will power on and the blue light indicator will flash 3
times.
2. Power Off: Press and hold the multifunctional button for 3 seconds,
the red light indicator will stay on for 2 seconds and then the Shanling
UP4 will power off.
3. Standby: After connecting successfully, the Shanling UP4
automatically enters the standby mode, and the blue light indicator
flashes once every 5 seconds.
Pairing mode
1. While the Shanling UP4 is powered off, press and hold the
multifunctional button for 5 seconds, until the indicator flashes red
and blue lights alternately. The Shanling UP4 is now ready for pairing.
2. After powering on, the Shanling UP4 will firstly try to reconnect to the
last connected device. If it fails to reconnect within 30 seconds, the
Shanling UP4 will enter the pairing mode and the indicator will flash
red and blue lights alternately. The Shanling UP4 can now be paired
with another device.
3. After manually disconnecting the connected device, the Shanling UP4
will automatically enter the pairing mode and the indicator will flash
red and blue lights alternately. The Shanling UP4 can now be paired
with another device.
To Next Page
Loading...
