Shark 612C - SECTION 1. NAMES OF PARTS; Standard Accessories

SECTION 1. NAMES OF PARTS
Standard Accessories
7
1. Stitch Selector
2. Bobbin Winder Stopper
3. Bobbin Winder Spindle
4. Reverse Stitch Control
5. Bobbin Winding Tension Disk
6. Thread Take-Up Lever
7. Upper Thread Guide
8. Thread Tension Dial
9. Needle
10. Presser Foot
11. Needle Plate
12. Extension Table
13. Carrying Handle
14. Spool Pin
15. Hand Wheel
16. Power Switch
17. Power Cord Receptacle
18. Free Arm
19. Presser Foot Release
20. Presser Foot Lifter
21
22
23
24
25
26
27
28
21. All Purpose Foot
22. Hemmer Foot
23. Zipper Foot
24. Buttonhole Foot
25. Seam Ripper
26. Set of Needles
27. Bobbins (x2)
28. Felt