Shark AZ950UK - Assembling Your Vacuum; Vacuum Assembly Steps

7 8
sharkclean.co.uk
1 Place motorised floor
nozzle on floor and
insert wand, pressing it
in until it clicks securely
into place.
ASSEMBLING
YOUR VACUUM
TIP: Push hose clip
into back of wand
for convenience.
2 Insert handle into
wand, pressing it in
until it clicks securely
into place.
3 Place pod onto
wand and slide
down to connect.
4 Connect hose into
back of pod, pressing it
in until it clicks securely
into place.
5 Store included
accessories on the
accessory posts on
the pod.
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
TIP: For quick cord
access, rotate upper
hook down and
remove cord.
TIP: Use cord clip
located on the side of
wand to hold cord in
place while vacuuming.