sharkclean.comsharkclean.com
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
LASER WARNING
THIS PRODUCT HAS A CLASS 1 LASER. IT IS SAFE UNDER REASONABLY FORESEEABLE
CONDITIONS (AS DEFINED IN THESE INSTRUCTIONS.) ALWAYS TURN OFF THE POWER
BEFORE LIFTING THE ROBOTIC VACUUM CLEANER OR PERFORMING ANY MAINTENANCE
ON IT. DO NOT LOOK DIRECTLY INTO LASER.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
GENERAL WARNINGS
1. For best performance and coverage,
remove cords from areas that need to be
cleaned.
2. Do not operate the robotic vacuum
cleaner in a room where an infant or child
is sleeping.
3. Do not operate the robotic vacuum
cleaner in an area where there are lit
candles or fragile objects on the floor to
be cleaned.
4. Do not operate the robotic vacuum
cleaner in a room that has lit candles on
furniture that the robotic vacuum cleaner
may accidentally hit or bump into.
5. Do not allow children to sit on the robotic
vacuum cleaner.
6. Do not use the robot on a wet surface,
unless it is a WD model mopping robot.
When using an electrical appliance, basic
precautions should always be followed,
including the following:
7. The robotic vacuum cleaner system
consists of a robotic vacuum and a
Self-Empty Base with a power supply.
These components contain electrical
connections, electrical wiring, and moving
parts that potentially present risk to the
user.
8. Before each use, carefully inspect all parts
for any damage. If a part is damaged,
discontinue use.
9. Use only identical replacement parts.
10. This robotic vacuum cleaner contains no
serviceable parts.
11. Use only as described in this Owner's
Guide. DO NOT use the robotic vacuum
cleaner for any purpose other than those
described in this Owner's Guide.
12. With the exception of filters, DO NOT
expose any parts of the robotic vacuum
cleaner to water or other liquids.
13.
DO NOT put hands into any
opening in the Self-Empty Base
or robot.
USE WARNINGS
14. For your robot’s cli sensors to work
properly, all runners, rugs, or carpets must
be eight inches from any stairs (or must
be continuous and extend over the edge
of the stairs). If a runner, rug, or carpet
edge that is less than eight inches from
the stairs cannot be moved, you must use
a digital no-go zone to block o the stairs.
For non-app users, use a boundary to
block o an unsafe boundary.
15. To minimize the risk of the robotic vacuum
cleaner traveling beyond an unsafe
boundary (stair/cli edges, fireplaces,
water hazards), establish these areas as
no-go zones using the mapping feature in
the SharkClean® mobile app. Upon setting
the boundary, run the vacuum and visually
confirm that the settings eectively
prevent it from passing beyond the set
boundary. Adjust settings as necessary.
16. This product has a Class 1 Laser. It is safe
under reasonably foreseeable conditions
(as defined in this Owner's Guide). Always
turn o the power before lifting the
robotic vacuum cleaner or performing any
maintenance on it.
17. DO NOT look directly into laser.
18. Always turn o the robotic vacuum
cleaner before inserting or removing the
filter or dust bin.
19. DO NOT handle plug, Self-Empty Base,
charging cable, or robotic vacuum
cleaner with wet hands. Cleaning and user
maintenance shall not be made by children
without supervision.
20. DO NOT use without robot dust bin and
filters in place.
21. DO NOT damage the cord:
a) DO NOT pull or carry Self-Empty Base
by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT close a door on the cord, pull
the cord around sharp corners, or leave
the cord near heated surfaces.
22. DO NOT put any objects into nozzle or
accessory openings. DO NOT use with any
opening blocked; keep free of dust, lint,
hair, and anything that may reduce airflow.
23. DO NOT use robotic vacuum cleaner
if airflow is restricted. If the air paths
become blocked, turn the vacuum cleaner
o and remove all obstructions before
turning on the unit again.
24. Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.
25. DO NOT use if robotic vacuum cleaner is not
working as it should, or has been dropped,
damaged, left outdoors, or dropped into
water.
26. DO NOT place robotic vacuum cleaner on
unstable surfaces.
27. DO NOT use to pick up:
a) Liquids.
b) Large objects.
c) Hard or sharp objects (glass, nails,
screws, or coins).
d) Large quantities of dust (drywall dust,
fireplace ash, or embers.)
e) DO NOT use as an attachment to power
tools for dust collection.
f) Smoking or burning objects (hot coals,
cigarette butts, or matches).
g) Flammable or combustible materials
(lighter fluid, gasoline, or kerosene).
h) Toxic materials (chlorine bleach,
ammonia, or drain cleaner).
i) Toxic materials (high concentrations
of chlorine bleach liquid, high
concentrations of ammonia, or drain
cleaning solution).
28. DO NOT use in the following areas:
a) Wet or damp surfaces.
b) Outdoor areas near fireplaces with
unobstructed entrances.
c) Spaces that are enclosed and may
contain explosive or toxic fumes or
vapors (lighter fluid, gasoline, kerosene,
paint, paint thinners, mothproofing
substances, or flammable dust.)
d) In an area with a space heater.
e) Near fireplaces with unobstructed
entrances.
29. Turn o the robotic vacuum cleaner before
any adjustment, cleaning, maintenance, or
troubleshooting.
30. Allow all filters to air-dry completely before
reinstalling them to prevent liquid from
being drawn into electric parts.
31. DO NOT modify or attempt to repair the
robotic vacuum cleaner or the battery
yourself, except as indicated in this
Owner's Guide. DO NOT use the vacuum if
it has been modified or damaged.
32. DO NOT use any household cleaners
(all-purpose cleaners, glass cleaners,
bleach) on any of the polished high gloss
surfaces on the Self-Empty Base or
robotic vacuum cleaner as they contain
chemicals that may damage these
surfaces. Instead, use a cloth dampened
with water to gently clean.
BATTERY USE
33. The battery is the power source for the
robotic vacuum cleaner. Carefully read
and follow all charging instructions.
34. To prevent unintentional starting, ensure
the robotic vacuum cleaner is powered o
before picking it up or carrying it.
35. For Shark Detect Pro Self-Empty XL dock
replacement, use XDRV2820AE. For
Shark Detect Pro Self-Empty Lite dock
replacement, use XDKRV2800S. For
replacement battery, use RVBAT85002
battery pack.
36. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals together increases the risk of fire
or burns.
37. Under abusive conditions, liquids may be
ejected from the battery. Avoid contact
with this liquid, as it may cause irritation or
burns. If contact occurs, flush with water. If
liquid contacts eyes, seek medical help.
38. Robotic vacuum cleaner should not be
stored, charged, or used at temperatures
below 50°F (10°C) or above 104°F
(40°C). Ensure the battery and vacuum
have reached room temperature before
charging or use. Exposing the robot or
battery to temperatures outside of this
range may damage the battery and
increase the risk of fire.
39. DO NOT expose the robotic vacuum
cleaner or battery to fire or temperatures
above 265°F (130°C) as it may cause
explosion.
SAVE THESE INSTRUCTIONS
For the latest warnings and cautions, go to support.sharkclean.com
To Next Page
Loading...
Need help?
General
