Shark DuoClean ZU881 User Manual

ZU881_QSG_REV_Mv3
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
MAINTENANCE
Empty dust cup after each use
ZU881
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum’s great features.
Register your vacuum at
registeryourshark.com
For additional parts
and accessories, visit
sharkaccessories.com
Empty
Release
Filter Maintenance
To keep suction strong, rinse
the filters with water only and
allow them to air-dry completely
before reinstalling them. Tap
loosedirt from filters asneeded
between washes.
See enclosed Owner’s Guide for
complete details on removing
and cleaning filters.
©2019 SharkNinja Operating LLC. DUOCLEAN, LIFT-AWAY, POWERED LIFT-AWAY, ZERO-M
and SHARK are registered trademarks of SharkNinja Operating LLC.
Zero-M Technology
The Zero-M Self-Cleaning Brushroll delivers nonstop hair removal. To clear any blockages,
see instructions below.
Cleaning the Brushroll
1. To open the brushroll garage, slide
both release buttons on the floor
nozzle away from you, towards the
back of the nozzle, then lift o the lid.
2. Clear away any objects or debris.
3. To close the brushroll garage, insert the
3 tabs on top of the lid into the 3 slots
in the nozzle, then push down on both
sides of the lid until it clicks securely
into place. If the Brushroll Indicator
Light isn’t green and the headlights are
flashing, check again that both sides of
the lid are locked in place.
Brushroll Maintenance
Carefully remove any
debris that may be
impeding the brushroll.
Cleaning the Soft Roller
Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.
Checking the Nozzle for Blockages
Tilt the neck of the nozzle back to straighten
the airway, then remove any blockages.
POWERED
LIFT-AWAY
®

Shark DuoClean ZU881 Specifications

General

Model	ZU881
Category	Vacuum Cleaner
Power Source	Corded
Cord Length	30 feet
Technology	DuoClean
Filtration	HEPA
Special Features	LED Headlights
Brushroll	Dual brushroll system

Summary

Vacuum Maintenance and Cleaning

Dust Cup Emptying

Procedure for emptying the dust cup after each vacuuming session.

Filter Maintenance Guide

Instructions on rinsing and air-drying vacuum filters for optimal suction.

Zero-M Technology and Brushroll

Explanation of the Zero-M Self-Cleaning Brushroll and how to clear blockages.

Soft Roller Cleaning

Guide for removing and cleaning the soft roller on the floor nozzle.

Nozzle Blockage Check

How to check and clear blockages within the vacuum cleaner's nozzle.

Vacuum Assembly

Parts Identification

List and visual identification of all components included with the vacuum.

Step-by-Step Assembly

Instructions for connecting the handle, wand, pod, and hose.

Vacuum Usage Modes

Upright Mode Operation

Guidance on using the vacuum in upright mode for floor cleaning.

Powered Lift-Away Mode

Instructions for using the portable Lift-Away mode for above-floor cleaning.

Above-Floor Cleaning

How to use the vacuum with accessories for cleaning areas above the floor.