Shark HP202 - User Manual

To Next Page

Air Puriﬁer

HP200 Series

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

GENERAL WARNINGS

1. This appliance has a polarized plug (one blade is wider

than the other). To reduce the risk of electric shock, this

plug is intended to fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature. Unplug

or disconnect the appliance from the power supply

before servicing.

2. DO NOT operate any fan with a damaged cord or plug.

Discard fan or return to an authorized service facility for

examination and/or repair.

3. DO NOT run cord under carpeting. DO NOT cover cord

with throw rugs, runners, or similar coverings. DO NOT

route cord under furniture or appliances. Keep cord

away from high traffic areas and place cord where it will

not be tripped over.

4. If the power cord is damaged, it must be replaced by

the manufacturer, its service agent, or similarly qualified

persons in order to avoid a hazard.

5. This appliance is not intended for use by anyone

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

USE WARNINGS

6. Children should be supervised to ensure that they DO

NOT play with the appliance.

7. Cleaning and user maintenance shall not be made by

children without supervision.

8. Prior to cleaning or other maintenance, the appliance

must be unplugged from the electrical outlet.

9. DO NOT handle plug or appliance with wet hands.

10. DO NOT use without filter in place.

11. Only use Shark® branded filters and accessories.

12. DO NOT damage the power cord:

a) DO NOT pull or carry appliance by the cord or use

the cord as a handle.

b) DO NOT unplug by pulling on cord. Grasp the plug,

not the cord.

c) DO NOT stand the appliance on the power cord,

close a door on the cord, pull the cord around sharp

corners, or leave the cord near heated surfaces.

13. DO NOT use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce airflow.

14. DO NOT use if airflow is restricted. If the air paths

become blocked, turn the appliance off and unplug from

electrical outlet. Remove all obstructions before you

plug in and turn on the unit again.

15. DO NOT use if appliance is not working as it should, or

has been dropped, damaged, left outdoors, or dropped

into water.

16. DO NOT place appliance on unstable surfaces such as

chairs or other furniture.

17. DO NOT use in the following areas:

a) Wet or damp surfaces

b) Outdoor areas

c) Spaces that are enclosed and may contain explosive

or toxic fumes or vapors (lighter fluid, gasoline,

kerosene, paint, paint thinners, mothproofing

substances, or flammable dust)

18. Turn off all controls before unplugging the appliance.

19. Unplug from electrical outlet when not in use and

before any maintenance or cleaning.

20. Hand wash with soapy water only. Washing with

cleaning chemicals could damage the unit.

21. Make sure filter is in place after routine maintenance.

22. Not suitable for use with solid-state speed controls.

REMOTE BATTERY

23. Dispose of coin cell batteries according to local

regulations. Keep batteries away from children at all

times. Even used batteries can cause injury.

WARNING: Chemical Burn Hazard. Keep batteries away

from children.

This product contains a lithium button/coin cell battery.

If a new or used lithium button/coin cell battery is

swallowed or enters the body, it can cause severe

internal burns and can lead to death in as little as 2

hours. After changing batteries, always completely close

and secure the battery compartment. If the battery

compartment does not close securely, stop using the

product, remove the battery, and keep it away from

children. If you think battery might have been swallowed

or placed inside any part of the body, seek immediate

medical attention.

SAVE THESE INSTRUCTIONS

Need help?

Do you have a question about the Shark HP202 and is the answer not in the manual?

Summary

Important Safety Instructions

General and Use Safety Warnings

Key safety precautions for operating the air purifier safely, including electrical, cord, and user capability guidelines.

Remote Battery Safety

Information and warnings regarding the remote control's button cell battery, including chemical burn hazards.

Setting Up Your Air Purifier

Product Parts Identification

Identifies all components of the air purifier unit, including vents, control panel, and filter.

Setup Tips and Placement

Guidance on optimal placement and usage environment for the air purifier, ensuring proper airflow.

Control Panel and Display Overview

Top Control Panel Buttons

Explains the function of each button on the air purifier's top control panel for operation and settings.

Front Display Screen Information

Details on how to read the air quality status, particle sizes, and time to clean air via the front display.

Air Quality Understanding and Optimization

Understanding Air Quality Indicators

Explains how the unit displays and interprets air quality levels using color rings and particle concentration.

Optimizing Fan Speed for Performance

Guidance on selecting the best fan speed for different cleaning needs, from quiet operation to maximum cleaning.

Troubleshooting and FAQs

Product Related Questions

Answers to common questions regarding the air purifier's product features, settings, and general operation.

Air Quality and Performance Issues

Addresses common issues related to air quality readings, unit performance, noise, and airflow.

Filter and Maintenance FAQs

Information on filter lifespan, replacement, optimization, and cleaning procedures.

Filter Installation and Maintenance

Installing and Removing the Filter

Step-by-step guide for filter replacement, including unlocking, removal, insertion, and resetting the filter life.

Used Filter Disposal

Instructions on how to properly dispose of used air purifier filters, emphasizing safe handling.

Maintaining Your Air Purifier

Guidelines for cleaning the exterior and interior of the air purifier to ensure optimal performance.

Available Accessories and Filters

Replacement Filter Information

Details on Shark® Nanoseal™ Base Filters with True HEPA and Microban options.

Remote Control Operation

Information on using the remote control and a guide to its specific buttons.

Warranty and Important Information

Two (2) Year Limited Warranty

Details on warranty coverage, what is and isn't covered, and how to obtain service.

Product Registration and Record Keeping

Instructions on registering your product, recording serial numbers, and the benefits of doing so.

Technical Specifications and Battery Disposal

Key technical data of the air purifier and guidelines for lithium battery removal and disposal.

FCC Warnings and Compliance

Information regarding FCC compliance and potential radio frequency interference.

Summary

Important Safety Instructions

General and Use Safety Warnings

Key safety precautions for operating the air purifier safely, including electrical, cord, and user capability guidelines.

Remote Battery Safety

Information and warnings regarding the remote control's button cell battery, including chemical burn hazards.

Setting Up Your Air Purifier

Product Parts Identification

Identifies all components of the air purifier unit, including vents, control panel, and filter.

Setup Tips and Placement

Guidance on optimal placement and usage environment for the air purifier, ensuring proper airflow.

Control Panel and Display Overview

Top Control Panel Buttons

Explains the function of each button on the air purifier's top control panel for operation and settings.

Front Display Screen Information

Details on how to read the air quality status, particle sizes, and time to clean air via the front display.

Air Quality Understanding and Optimization

Understanding Air Quality Indicators

Explains how the unit displays and interprets air quality levels using color rings and particle concentration.

Optimizing Fan Speed for Performance

Guidance on selecting the best fan speed for different cleaning needs, from quiet operation to maximum cleaning.

Troubleshooting and FAQs

Product Related Questions

Answers to common questions regarding the air purifier's product features, settings, and general operation.

Air Quality and Performance Issues

Addresses common issues related to air quality readings, unit performance, noise, and airflow.

Filter and Maintenance FAQs

Information on filter lifespan, replacement, optimization, and cleaning procedures.

Filter Installation and Maintenance

Installing and Removing the Filter

Step-by-step guide for filter replacement, including unlocking, removal, insertion, and resetting the filter life.

Used Filter Disposal

Instructions on how to properly dispose of used air purifier filters, emphasizing safe handling.

Maintaining Your Air Purifier

Guidelines for cleaning the exterior and interior of the air purifier to ensure optimal performance.

Available Accessories and Filters

Replacement Filter Information

Details on Shark® Nanoseal™ Base Filters with True HEPA and Microban options.

Remote Control Operation

Information on using the remote control and a guide to its specific buttons.

Warranty and Important Information

Two (2) Year Limited Warranty

Details on warranty coverage, what is and isn't covered, and how to obtain service.

Product Registration and Record Keeping

Instructions on registering your product, recording serial numbers, and the benefits of doing so.

Technical Specifications and Battery Disposal

Key technical data of the air purifier and guidelines for lithium battery removal and disposal.

FCC Warnings and Compliance

Information regarding FCC compliance and potential radio frequency interference.

The Shark Air Purifier HP200 Series is a household appliance designed to improve indoor air quality by filtering out various airborne particles. It features a top control panel and a front display screen, providing users with real-time air quality information and control over its functions.

Function Description:

The air purifier's primary function is to clean the air by drawing in ambient air, passing it through a filter, and then releasing cleaner air back into the room. It utilizes a built-in sensor to detect air quality and can operate in an Auto Mode, where the fan speed automatically adjusts based on the detected particulate matter (PM) levels. The device measures three particle sizes: PM1 (viruses, ultra-fine allergens), PM2.5 (smoke, bacteria), and PM10 (dust, mold, pollen). The air quality is displayed as a percentage of clean air, categorized into "Good," "Fair," and "Poor," with corresponding color rings (blue, amber, red) on the displays. An estimated "Time to Clean Air" is also provided, indicating how long it will take to achieve clean air.

Usage Features:

The air purifier offers several user-friendly features accessible via its top control panel and a remote control.

On/Off: Simple button to power the unit on or off.
Auto Mode: When activated, the fan speed automatically adjusts based on real-time air quality readings. This mode optimizes filter life and performance by decreasing fan speed as air quality improves and increasing it when air quality worsens.
Fan Speed: Users can manually select one of four fan speed settings (Low, Medium, High, Maximum). Manual adjustment deactivates Auto Mode.
Air Info: This button allows users to switch between different air quality display options on the front screen, showing various particle sizes and clean air percentage.
Brightness: The brightness of both the front display screen and the top control panel can be adjusted to three settings: full brightness, partially dim, or fully dim.
Shut-Off Timer: A timer can be set for the air purifier to run for 1 to 12 hours before automatically shutting off.
Filter Life Indicator: A dedicated button displays the remaining filter life. When the filter life reaches 0%, the button flashes, indicating that a filter change is required.
Child Lock: This feature, activated by holding the button for two seconds, locks the top control panel buttons to prevent unintended changes. Holding it again for two seconds unlocks the panel.
Eco Mode: After achieving 100% clean air status for 10 minutes in Auto Mode, the air purifier enters Eco Mode, where the fan turns off until particles are detected again. This optimizes filter life and energy consumption.
Mute Beeping: The unit's beeping sounds can be muted by holding the Air Info and Child Lock buttons simultaneously for two seconds.
Remote Control: A remote control is included, allowing users to operate the air purifier from a distance with buttons for On/Off, Air Info, Auto Mode, Brightness, Fan Speed, and Shut-Off Timer.

Maintenance Features:

Proper maintenance ensures optimal performance and extends the life of the air purifier.

Filter Replacement: The unit indicates when the filter needs to be replaced via the Filter Life button. Filters are not washable or recyclable and should be disposed of in an airtight plastic bag. Replacement involves flipping the unit, twisting to unlock the filter door, removing the old filter, inserting a new one (after removing all packaging), and twisting the door back into place. After replacement, the Filter Life percentage must be manually reset by holding the Filter Life button for three seconds.
Exterior Cleaning: The exterior of the unit should be cleaned every two months or as needed using a microfiber cloth to remove dust. For sanitization, a microfiber cloth dampened with warm, soapy water can be used, avoiding excess water and abrasive chemical cleaners.
Interior Cleaning: The interior of the unit should also be cleaned every two months or as needed. This involves removing the filter and using a vacuum cleaner or microfiber cloth to remove dust and debris. Abrasive chemical cleaners should not be used inside the unit.
Filter Life Optimization: To maximize filter life, it is recommended to flip and rotate the filter's direction every three months. This helps equalize and balance the distribution of captured particles throughout the filter, allowing for extended usage.
Replacement Filters: Replacement filters, including the Shark NanoSeal™ Base Filter with True HEPA and the Shark NanoSeal™ Base Filter with True HEPA + Microban (which offers additional antimicrobial protection), are available for purchase.