sharkclean.comsharkclean.com
Clean o any debris on the bristles.
Using a coin, turn locks counterclockwise, then lift the cover to access Brushroll.
If you run over a hard or sharp object or
notice a noise change while vacuuming,
check for blockages or objects caught
behind the brushroll.
Clear away any dust, dirt, or blockages in
Debris Intake.
To close the cover, push down until it clicks
into place. Close the locks by using a coin to
turn them clockwise.
DEBRIS WRAPPED AROUND BRUSHROLL DEBRIS BEHIND BRUSHROLL
CLEANING THE BRUSHROLL
MAINTENANCE
CHECKING FOR BLOCKAGES
Detach wand from pod and
handle, and check both ends
for blockages.
Detach wand from pod, and
check opening for blockages.
Detach handle from wand and
hose from the vacuum pod, and
check openings for blockages.
Detach dust cup from vacuum pod.
Empty dust cup, remove debris
from lint screen, and check for
blockages.
WAND BLOCKAGES POD BLOCKAGES
HANDLE/HOSE BLOCKAGES
DUST CUP BLOCKAGES
To Next Page
Loading...
Need help?
General
