5www.sharkvac.com
English
8 Attach the Super Stretch Hose:
a) Snap hose into swivel connector
b) Route under anti-tip hook
c) Route over upper hose holder
d) Press securely onto cleaning wand
IMPORTANT:
To prevent vacuum
from tipping, secure
hose under the
anti-tip hose hook.
IMPORTANT:
For suction to reach the Floor Power
Nozzle, the Cleaning Wand and
Super Stretch Hose must be attached
securely on the vacuum body.
9 When storing your vacuum, wind
cord around the two cord holders
and secure with cord clip:
• Quick Cord release at the top of
the unit – place in the upright
position.
• Second holder near the base –
turn until it is pointing down.
To release the cord, turn the Quick
Cord release to the left or right.
9
8
a
b
c
d
To Next Page
Loading...
