The Shark Rotator® Pet Plus Upright Vacuum, model NV255, is a versatile cleaning appliance designed for comprehensive whole-home cleaning, with a particular focus on pet hair removal and deep cleaning. This owner's guide provides detailed instructions for assembly, operation, and maintenance, ensuring optimal performance and longevity of the vacuum.
Function Description:
The Shark Rotator® Pet Plus Upright Vacuum is primarily designed for dry vacuuming of various floor types, including hard floors, area rugs, and carpets. Its upright design allows for easy maneuverability and efficient cleaning of large areas. The vacuum features a powerful suction system and a motorized brushroll to effectively pick up dirt, dust, debris, and pet hair from different surfaces. It can be used in multiple cleaning modes: as a full upright vacuum for floor cleaning, or with the handle or wand detached for above-floor cleaning. The appliance is equipped with a filtration system to capture allergens and fine dust, contributing to a cleaner home environment.
Usage Features:
The vacuum offers several features to enhance its usability and adaptability to different cleaning tasks:
- Assembly: The vacuum is designed for straightforward assembly, involving inserting the wand into the pod, the handle into the wand, attaching the hose to the back of the vacuum pod and clipping it to the wand, and securing a C-shaped clip. Accessories can be stored on designated tool storage posts for convenience.
- Power Cord Management: The power cord features an upper cord hook that can be rotated down for easy cord access and removal. A cord clip on the side of the wand helps secure the cord during vacuuming, preventing tangles and ensuring safe operation.
- Power/Surface Switch: A power/surface switch allows users to select the appropriate setting for different floor types. "I Hard Floor" is recommended for bare floors and small area rugs, while "II Carpet" is for carpets. There is also an "O Power Off" setting.
- Suction Control: A suction control slider, located on the top of the handle, enables users to adjust the suction power. The "MIN" setting reduces suction for increased maneuverability on carpets, while "MAX" provides maximum suction for bare floors. This feature allows for customized cleaning based on surface type and cleaning needs.
- Cleaning Modes:
- Upright Mode: To engage the brushroll for floor cleaning, the user places a foot on the floor nozzle and tilts the handle back.
- Above-Floor - Handle: The handle can be detached from the wand by pressing the Handle Release button, allowing for focused above-floor cleaning with accessories.
- Above-Floor - Wand: The wand can be detached from the pod by pressing the Wand Release button, providing extended reach for cleaning high or difficult-to-access areas with accessories.
- Brushroll Indicator Light: This light provides visual feedback on the brushroll's status:
- Solid Green: Indicates the brushroll is spinning and functioning correctly.
- Solid Red: Signals a jam in the brushroll area, requiring the user to turn off and unplug the vacuum to clear blockages.
- Flashing Red: Indicates that the motorized floor nozzle is overheating. In this case, the vacuum should be turned off, and allowed to cool for at least 45 minutes.
- Accessories: The vacuum comes with a range of available accessories to tackle various cleaning challenges:
- Duster Crevice Tool: A two-in-one tool offering extended reach for small spaces and a soft dusting brush for multiple surfaces.
- Wide Upholstery Tool: Designed to remove pet hair, dust, and large debris from mattresses, couches, curtains, and other delicate upholstered surfaces.
- Hair Removal Multi-Tool: A versatile tool with a rubber bristle brush for stubborn hair on carpeted areas, which can be removed to reveal an upholstery tool for couches and bedding.
- Pet Power Brush: Specifically designed to remove pet hair and ground-in dirt from carpeted stairs and upholstery.
- Under-Appliance Wand: An adjustable 36-inch tool for cleaning under and behind hard-to-move appliances and furniture. The extension piece can be flipped to clean the underside of appliances.
Maintenance Features:
Regular maintenance is crucial for maintaining the vacuum's suction power and overall performance. The guide outlines several maintenance procedures:
- Emptying the Dust Cup:
- To remove the dust cup, press the button on top of the handle, tilt the cup forward, and lift it out.
- To empty the dust cup, press the lower release button to open the bottom flap.
- To clean collected debris from the lint screen, press the top release button and lift the handle to open, then gently brush the lint screen.
- To reinstall, place the bottom of the dust cup into the pod and tilt it back until it clicks into place.
- Cleaning and Replacing Filters:
- Pre-Motor Filters (Foam and Felt): These filters should be cleaned every 3 months. After removing the dust cup, lift out the foam and felt filters. They should be rinsed with cold water only and allowed to air-dry completely for at least 24 hours before reinstallation. Soap should not be used.
- Post-Motor HEPA Filter: This filter should be cleaned every year. To access it, press down on the top of the filter door, tilt it, and lift it out. Press the tab at the top of the HEPA filter and pull it away from the base of the vacuum. Rinse with cold water and allow to air-dry completely for at least 24 hours. To reinstall, insert the HEPA filter into the unit and replace the filter door.
- Cleaning the Brushroll:
- To access the brushroll, turn the locks counterclockwise with a coin and lift the cover.
- Any debris wrapped around the bristles should be cleaned off.
- If a hard or sharp object is encountered, or a noise change is noticed, check for blockages or objects caught behind the brushroll and clear any dust, dirt, or blockages in the Debris Intake.
- To close the cover, push down until it clicks into place, then close the locks with a coin.
- Checking for Blockages: The guide provides instructions for checking various parts of the vacuum for blockages, which can cause reduced suction or prevent the brushroll from spinning. These areas include:
- The hose and opening on the back of the vacuum pod.
- Both ends of the wand after detaching it from the floor nozzle and handle.
- The opening of the wand after detaching it from the power unit.
- The openings of the handle and hose after detaching them from the vacuum pod.
- The dust cup and lint screen after detaching the dust cup from the vacuum pod.
The Shark Rotator® Pet Plus Upright Vacuum is also equipped with a motor-protective thermostat that automatically turns off the suction motor if the vacuum overheats. The guide provides steps to restart the thermostat, which include turning off and unplugging the vacuum, emptying the dust cup, cleaning filters, checking for blockages, and allowing the unit to cool for a minimum of 45 minutes before restarting.
This comprehensive approach to design, operation, and maintenance ensures that the Shark Rotator® Pet Plus Upright Vacuum remains a reliable and effective tool for maintaining a clean home, especially for pet owners.
Need help?
General
To Next Page