To Next Page

To Previous Page

HEPA

XHF340

EMPTY THE DUST CUP

1 Pull up on the dust cup release latch and lift the dustcup off the pod.

2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch.

3 Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Turn the dust cup over and empty the upper chamber by

holding it by the handle on the side of the dust cup.

CLEAN THE FILTERS

See cleaning schedule on page 2

4 With the dust cup removed, remove and rinse the foam and felt ﬁlters every 3 months. Let air dry completely before replacing. Hand wash only. Tap loose dirt off

ﬁlters between washes as needed.