Cleaning with the Vacuum Accessories
Before cleaning with your
accessories:
Stand vacuum into upright position.
Secure Super
Stretch Hose in
the anti-tip hose
hook to prevent
tipping.
Select the “I" - On position for
suction only cleaning.
DO NOT pull vacuum cleaner
around by the hose.
DO NOT overextend the hose.
Vacuum Accessories
Your vacuum comes with a Super
Stretch Hose and Cleaning Wand
with handle. Use one or the other to
attach your cleaning accessories.
1 Using the Super Stretch Hose:
Stand the vacuum into upright
position.
Remove the hose from the
Cleaning Wand with handle.
Push the selected tool into the
hose connector.
1
3
4
5
6
2 Using the Cleaning Wand:
Stand the vacuum into upright
position.
Remove the Cleaning Wand with
handle (with hose attached)
from the unit.
Push the selected tool into the
end of the Cleaning Wand.
For a longer reach, add the extra
Cleaning Wand (7) and then
attach the various accessories.
3 Pet Hair Power Brush
4 Dusting Brush
5 Crevice Tool
6 16” Crevice Tool
Note: Remove the crevice tool
from the Cleaning Wand to use.
7 Extra Cleaning Wand
To order additional parts and accessories,
go to www.sharkclean.com or call
1-800-798-7398.
2
3
4
5
6
7
NV80_26_IB_E_111130_3.indd 7 11-11-30 3:26 PM
To Next Page
Loading...
