sharkclean.comsharkclean.com
MAINTENANCE
EMPTYING THE DUST CUP
Press the wand release button and lift the handheld
vacuum o the wand.
Press the Empty button on the front of the dust cup.
Perform regular maintenance on your filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electricparts.
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup
reaches the MAX fill line.
MAINTENANCE
CLEANING FILTERS
IMPORTANT: Unplug the vacuum before performing any maintenance. IMPORTANT: Unplug the vacuum before performing any maintenance.
NOTE: The pre-motor filters should be
replaced every 2.5 years. The post-motor filter
should be replaced every 3 years.
PRE-MOTOR FILTERS POST-MOTOR FILTER
Replacement Pre-Motor Filter Kit
(Foam & Felt)
XFFV300
Clean once a month.
Replacement Post-Motor Filter
XFFV300
Clean once a year.
REPLACEMENT FILTERS
The Pre-Motor Filters should be washed
once a month.
The Post-Motor Filter should be washed
once every 9 months.
Foam
Felt
Empty
To Next Page
Loading...
Need help?
General
