Shark Rocket DuoClean UV480 Series User Manual

sharkclean.comsharkclean.com
ASSEMBLY
SETTINGS
CLEANING MODES
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
NOTE: Select Carpet for stuck-on dust and debris.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
To clean floors, place foot on floor nozzle
and tilt handheld vacuum back.
UPRIGHT
Detach the wand for more reach to clean
baseboards, ceiling fans, window sills, and other
hard-to-access areas. Stand the vacuum upright,
then step on the foot pedal on the left side of the
floor nozzle and pull the wand up to disconnect it.
ABOVE-FLOOR WITH WAND
Press the Wand Release button to lift the handheld
vacuum o the wand. Attach the handheld vacuum
to an accessory or directly to the nozzle. Great for
cleaning stairs and furniture.
ABOVE-FLOOR HANDHELD
(Click)
(Click)
1 2
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
Ensure all connections click securely into place.
Slide switch to the bottom
to turn o power. To begin
vacuuming, slide switch to
the appropriate setting.
Bare Floor/Small Area Rugs
The brushroll spins slowly to
clean bare floors and delicate
arearugs.
Carpet
The brushroll spins faster
to pick up debris below
the surface of your carpet.
OFF SETTING I SETTING II
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green
The brushroll is on and working as it should.
Solid Red
There is a jam in the brushroll area. Turn your vacuum o and remove the blockage.
No Light: The vacuum is o or in the upright position.
Flashing Red: The vacuum has overheated. See Troubleshooting section.

Shark Rocket DuoClean UV480 Series Specifications

General

Brand	Shark
Model	Rocket DuoClean UV480 Series
Category	Vacuum Cleaner
Language	English