sharkclean.comsharkclean.com
MAINTENANCE
EMPTYING THE DUST CUP
Press the wand releasebutton and lift the handheld
vacuum o the wand.
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons at the
same time and pull out the dust cup. Press the Empty
button on the front of the dust cup.
The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in
the dust cup reaches the MAX fill line.
IMPORTANT: Unplug the vacuum before performing any maintenance.
OR
Empty
Dust Cup
Release
Perform regular maintenance on the filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electricparts.
MAINTENANCE
CLEANING FILTERS
IMPORTANT: Unplug the vacuum before performing any maintenance.
PRE-MOTOR FILTERS POST-MOTOR FILTER
Replacement Pre-Motor Filter Kit
XPMFK320
Replacement Post-Motor Filter
1084FTV320
REPLACEMENT FILTERS
Wash the pre-motor filters once a month. Wash the post-motor filter every 9 months.
NOTE: The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.
To Next Page
Loading...
Need help?
General
