sharkclean.com
SETTINGS
CLEANING MODES
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
NOTE: Select Carpet for stuck-on dust and debris.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
Slide switch to the bottom
to turn o power. To begin
vacuuming, slide switch to the
appropriate setting.
Bare Floor/Small Area Rugs
The brushroll spins slowly
to clean bare floors and
small arearugs.
Carpet
The brushroll spins faster
to pick up debris below the
surface of your carpets.
OFF SETTING I SETTING II
To clean floors, step on floor nozzle
and tilt handheld vacuum back.
UPRIGHT
Detach the wand for more reach to clean
baseboards, ceiling fans, window sills,
and other hard-to-access areas. Stand the
vacuum upright, then step on the foot pedal
on the left side of the floor nozzle and pull
the wand up to disconnect it.
ABOVE-FLOOR WITH WAND
Press the Wand Release button to lift the
handheld vacuum o the wand. Great for
cleaning stairs and furniture.
Wand Release
Button
ABOVE-FLOOR HANDHELD
To Next Page
Loading...
Need help?
General
