sharkclean.com
Perform regular maintenance on your filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters
to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into
electricparts.
MAINTENANCE
CLEANING FILTERS
IMPORTANT: Unplug the vacuum before performing any maintenance.
PRE-MOTOR FILTERS POST-MOTOR FILTER
Replacement Pre-Motor Filter Kit
(Foam & Felt)
XFFV300
Clean once a month.
Replacement Post-Motor Filter
XFFV300
Clean once a year.
REPLACEMENT FILTERS
Open the lid on the top of the handheld
vacuum to lift out the pre-motor filters.
The Pre-Motor Filters should be washed
once a month.
To remove the post-motor filter, open the
filter cover on the handheld vacuum and pull
out the filter.
The Post-Motor Filter should be washed
once every 9 months.
Foam
Felt
NOTE: The pre-motor filters should be replaced every 2.5 years. The post-motor filter should
be replaced every 3 years.
To Next Page
Loading...
Need help?
General
