BOTTOM OF FLOOR NOZZLE
1 Use a coin to unlock the three locks on
the bottom of the floor nozzle.
2 A portion of the base is removable to allow
for better access to the brushroll and
exposure to the airway. Shine a flashlight
from the bottom to check for possible
blockages in the airway.
3 Remove any string, carpet fibers, or
hair that may be wrapped around the
brushroll. There is a groove along the
brushroll that allows a pair of scissors to
cut across it to loosen up debris.
4 To re-assemble, replace base by lining it
up along the front of the nozzle. Rotate
down to snap into place until you hear a
click. Lock the three locks.
STEP 1 STEP 3
STEP 2 STEP 4
To Next Page
Loading...
