CHOOSING THE APPROPRIATE SETTING
The Rocket
®
has a 2-speed Power slider switch on the handle to select the speed of the
brushroll.. Slide the switch to appropriate speed setting (I or II) and start cleaning.
Bare Floor, Area Rugs (I) – The brushroll spins slowly to clean bare floors and delicate
arearugs.
High Pile Carpets (II) – The brushroll spins faster to pick up debris below the surface
ofyour carpets.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please ensure setting is on high pile carpets (II).