Shark Rocket HV345 - Emptying the Dust Cup; Cleaning Filters; Replacement Filters

sharkclean.comsharkclean.com
MAINTENANCE
EMPTYING THE DUST CUP
Perform regular maintenance on your filters to keep your vacuum's suction power optimal.
IMPORTANT: To prevent damage, rinse filters with water ONLY . DO NOT use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electricparts.
The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in
the dust cup reaches the MAX fill line.
MAINTENANCE
CLEANING FILTERS
IMPORTANT: Unplug the vacuum before performing any maintenance. IMPORTANT: Unplug the vacuum before performing any maintenance.
PRE-MOTOR FILTERS POST-MOTOR FILTER
Replacement Pre-Motor Filter Kit
XPMFK320
Replacement Post-Motor Filter
1084FTV320
REPLACEMENT FILTERS
OR
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
Empty
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons at the
same time and pull out the dust cup. Press the Empty
button on the front of the dust cup.
Dust Cup
Release
Press the WAND RELEASE button and lift the
handheld vacuum o the wand.
WAND