(Click)
ASSEMBLY
1. Insert wand into Zero-M™ Cleaner Head.
2. Insert handheld vacuum into wand.
Ensure all connections click securely into place.
(Click)
SETTINGS
CLEANING MODES
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, High Pile Carpets.
NOTE: All accessories attach to either the wand or the handheld vacuum.
1 2
Slide switch to the bottom
to turn o power. To begin
vacuuming, slide switch to
the appropriate setting.
Bare Floor/Area Rugs
The brushroll spins slowly
to clean bare floors and
delicate arearugs.
High Pile Carpets
The brushroll spins faster
to pick up debris below
the surface ofyour carpets.
OFF SETTING I SETTING II
To clean floors place foot on cleaner
head and tilt handheld vacuum back.
UPRIGHT
Stand the vacuum upright. Step on the foot pedal
on the bottom left side of the cleaner head and pull
the wand up to disconnect it. Great for cleaning
baseboards, ceiling fans, window sills, etc.
ABOVE-FLOOR WITH WAND
Press the WAND RELEASE button and lift the
handheld vacuum o the wand. Great for cleaning
stairs and furniture.
ABOVE-FLOOR HANDHELD
To Next Page
Loading...
Need help?
General
