MAINTENANCE
EMPTYING THE DUST CUP
Press the WAND RELEASE button and lift the
handheld vacuum o the wand.
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons at the
same time and pull out the dust cup. Press the Empty
button on the front of the dust cup.
Perform regular maintenance on your filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electricparts.
The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in
the dust cup reaches the MAX fill line.
MAINTENANCE
CLEANING FILTERS
IMPORTANT: Unplug the vacuum before performing any maintenance. IMPORTANT: Unplug the vacuum before performing any maintenance.
PRE-MOTOR FILTE RS POST-MOTOR F ILTE R
Replacement Pre-Motor Filter Kit
XPMFK320
Replacement Post-Motor Filter
1084FTV320
REPLACEMENT FILTERS
OR
Empty
Dust Cup
Release
To Next Page
Loading...
Need help?
General
