Shark S1000 Series Instructions

7 8
1-800-798-7398 sharkclean.com
ENGLISH
USING YOUR STEAM MOP
1 To remove the tank, lift
it up and away from the
Steam Mop body. Make
sure to unplug the Steam
Mop before removing the
water tank.
2 To remove the water
tank cap, twist
counterclockwise. Fill tank
completely with distilled
water or tap water.
3 Replace cap on water tank and turn cap
clockwise to seal.
4 To replace the water tank, align it so the
cap faces down. Place the cap into the
hole in the Steam Mop body and slide tank
down until it clicks securely into place.
CAUTION: DO NOT
scrub any one area for
an extended period
oftime.
IMPORTANT: Before
you fill up the tank, make
sure your Steam Mop
is unplugged from the
electrical outlet.
IMPORTANT: Make
sure you DO NOT use
the Shark
®
Steam Mop
without first attaching a
Dirt Grip
™
pad and filling
the tank with water.
NOTE: To prolong the life
of your Steam Mop, we
recommend using distilled
water.
NOTE: Sweep or vacuum
your floors prior to cleaning
with your Steam Mop.
NOTE: Please wait 2 to 3
minutes for the Steam Mop to
cool off before removing the
Dirt Grip pad. NEVER leave
the Steam Mop with a damp
or wet Dirt Grip pad on any
floor for an extended period
of time.
STEP 1 STEP 2 STEP 4STEP 3

Shark S1000 Series Specifications

General

Brand	Shark
Model	S1000 Series
Category	Steam Cleaner
Language	English