4 TOLL FREE: 1-800-798-7398
Getting Started - cont’d
IMPORTANT: Do not use on unsealed wood
or unglazed ceramic floors. On surfaces that
have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended to
test an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
2 Use the lavender loop on the side of the cleaning
pocket to slide the mop head into the pocket.
Then secure the quick fasteners on the top of the
pocket to lock in place. (fig. 2)
3 Snap the mop head into the base to secure it.
(fig. 3)
4 Open the water tank door. (fig. 4)
Use the filling flask and pour water into the tank.
Do not overfill. Press the water tank door firmly
to close. (fig. 5)
fig. 2
fig. 3
fig. 4
fig. 5
To Next Page
Loading...
