Why is my Shark S3501 Steam Cleaner not making steam?
If your Shark Steam Cleaner isn't producing steam, prime the pump (refer to page 4 for detailed instructions). Also, verify that the water tank has enough water. If it's empty, refill it following the provided instructions.
How to fix a Shark S3501 that will not turn on?
Ensure your Shark Steam Cleaner is securely plugged into a 120V AC electrical outlet. Check your fuse or breaker. If it still doesn’t work, call 1-800-798-7398.
Why are my floors cloudy after using my Shark S3501?
Cloudy, streaky, or spotty floors after using your Shark Steam Cleaner can often be resolved by addressing the microfiber pocket. Try flipping or replacing the pocket, as it may be dirty. Avoid using powder detergent when washing the pocket, as this can damage it. For kitchen areas with grease buildup, pretreat the area with a degreasing agent like an all-purpose cleaner or dish soap and paper towels. Also, avoid leaving the mop in one spot for too long. If you have hard water, switching to distilled water might help.
What to do if my Shark S3501 Steam Cleaner leaves water on the floor?
If your Shark Steam Cleaner leaves water on the floor, the microfiber cleaning pocket might be too wet. Unplug the steam mop and replace the microfiber cleaning pocket. Ensure the steam pocket is correctly attached.
Why is my Shark S3501 Steam Cleaner hard to push?
If your Shark Steam Cleaner is hard to push, first ensure that the steam pocket is correctly attached. Also, check if the pocket is excessively dirty. You can also try increasing the pole height for better leverage.
General| Type | Steam Mop |
|---|---|
| Water Tank Capacity | 450 ml |
| Power | 1200 watts |
| Cord Length | 20 feet |
| Heat-up Time | 30 seconds |
| Warranty | 1 year limited |
| Accessories | Microfiber pads |
Essential safety rules for household use, including operation and handling.
Detailed warnings on scalding, polarized plugs, and electrical shock prevention.
Important warnings regarding floor surfaces, handling precautions, and usage.
Steps for assembling the mop and filling the water tank.
Adjusting handle height and general tips for efficient operation.
Lists all included parts and technical details of the steam mop.
Detailed instructions on assembling the mop and attaching the cleaning pad.
Step-by-step guide for filling the water tank using the provided flask.
How to adjust the mop handle for optimal user comfort.
Connecting to power, priming the pump, and initial steam generation process.
How to use and flip the cleaning pad, and refill the water tank.
Instructions for using the carpet glider to refresh carpets.
Procedures for unplugging, cooling, and storing the steam mop.
Guidelines for washing and caring for the cleaning pads.
Details of available replacement parts and how to order them.
Solutions for common problems encountered with the steam mop.
Explains the one-year limited warranty coverage, exclusions, and conditions.
Information on registering the product for warranty purposes.
To Next Page