What to do if my Shark Steam Cleaner won't make steam?
If your Shark Steam Cleaner isn't producing steam, try priming the pump. Also, make sure there's water in the water tank. If it's empty, add water following the instructions.
How to fix a Shark Steam Cleaner that won't turn on?
If your Shark Steam Cleaner isn't turning on, ensure it's securely plugged into a 120V AC electrical outlet. Also, check your fuse or breaker.
Why is my Shark Steam Cleaner leaving water on the floor?
If your Shark Steam Cleaner is leaving water on the floor, the micro-fiber Steam Pocket® might be too wet. Unplug the Steam Pocket® Mop and change the micro-fiber Steam Pocket®. Also, ensure the Steam Pocket® is attached correctly.
Why are my floors cloudy after using Shark Steam Pocket S3505W Steam Cleaner?
Cloudy, streaky, or spotty floors after steaming with your Shark Steam Cleaner can be due to several reasons. The micro-fiber Steam Pocket® might be dirty, so flip or change the pocket. Leftover detergent may also cause streaks, so re-wash the pocket with liquid detergent. If you're cleaning in a kitchen, a build-up of grease might be the issue; clean the area first with a degreasing agent. Leaving the mop in one spot for too long can also cause this. Finally, if you have hard water, using distilled water is recommended.
Why is my Shark Steam Pocket S3505W hard to push?
If your Shark Steam Cleaner is hard to push, make sure the Steam Pocket® is attached correctly. Check if the Steam Pocket® is excessively dirty. You might also try increasing the height of the pole for better leverage.
General| Type | Steam Cleaner |
|---|---|
| Model | S3505W |
| Heat Up Time | 30 seconds |
| Wattage | 1200 watts |
| Steam Time | 15 minutes |
| Color | White |
| Accessories | Microfiber pads |
Basic safety precautions and warnings for operating the steam mop, covering points 1-10.
Step-by-step guide for assembling the mop handle and filling the water tank.
Detailed instructions for assembling the mop and attaching the micro-fiber cleaning pocket.
Solutions for common issues such as the mop not turning on, not making steam, or leaving water on the floor.
To Next Page