Why is my Shark LIFT-AWAY PRO STEAM POCKET MOP S3901K N not producing steam?
If your Shark Steam Cleaner isn't producing steam, first check if the water tank has enough water. If empty, refill it according to the instructions. If the unit still doesn't make steam after that, you may need to clean the nozzle.
Why can't I activate steam on my Shark LIFT-AWAY PRO STEAM POCKET MOP S3901K N?
If you cannot activate steam and the blue light remains flashing on your Shark Steam Cleaner, unplug the unit and try a different outlet to reset the standby mode. Add water to the tank and select a steam setting by pressing the ON/STEAM SETTING button. If it still doesn't work, call Customer Care at 1-800-798-7398.
What to do if my Shark Lift-Away Pro Steam Pocket Mop will not turn on?
If your Shark Lift-Away Pro Steam Pocket Mop isn't turning on, ensure it's securely plugged into a 120V AC electrical outlet. Also, check your fuse or breaker. If it still doesn't work, contact Customer Care at 1-800-798-7398.
How to prevent cloudy, streaky floors when using Shark LIFT-AWAY PRO STEAM POCKET MOP S3901K N?
If your floors are cloudy, streaky, or spotty after using the Shark Steam Cleaner, the cleaning pad might be dirty, so flip or change it. If you washed the pad with powder detergent, it could be damaged. Also, this could indicate prior soap or grease residue on the floor. Try rinsing the floor with only water, letting it dry, and then steam mopping again with a clean pad. For stubborn cases, rinse the floor with a mix of one part vinegar and two parts water. One or more rinses generally removes the residue.
What to do if my Shark Lift-Away Steam Cleaner leaves water on the floor?
If your Shark Lift-Away™ Pro Steam Pocket® Mop is leaving water on the floor, check if the cleaning pad is too wet. If it is, unplug the steam mop and change the cleaning pad. Also, make sure the cleaning pad is attached correctly.
How to prevent white spots from Shark LIFT-AWAY PRO STEAM POCKET MOP S3901K N Steam Cleaner?
If your Shark Lift-Away Pro Steam Pocket Mop left a white spot on the floor, avoid leaving the steam mop on the floor with a damp or wet cleaning pad. If you're using tap water, switch to distilled water. Also, ensure the cap is securely on the water tank.
Why is my Shark Lift-Away Steam Cleaner hard to push?
If your Shark Lift-Away Pro Steam Pocket Mop is hard to push, make sure the cleaning pad is attached correctly. Also, check if the cleaning pad is excessively dirty and replace it if needed.
Why is my Shark LIFT-AWAY PRO STEAM POCKET MOP S3901K N Steam Cleaner leaving water drops?
If the nozzle is leaving water drops on the garment or upholstery when using the Shark Steam Cleaner, make sure the garment steam bonnet or the upholstery bonnet is in place during use. The steamer bonnet prevents water drops and removes impurities. If the steamer bonnet is too wet or the frame has condensation, let the unit cool for 30 minutes, remove the steamer bonnet and let it dry out before using again, or replace it with a new one.
General| Brand | Shark |
|---|---|
| Model | LIFT-AWAY PRO STEAM POCKET MOP S3901K N |
| Category | Steam Cleaner |
| Language | English |
Warning about the high temperature of steam emitted by the mop.
Explanation of the polarized plug and its safety feature.
Comprehensive list of safety precautions for using the steam mop.
Labeled diagram of all components included with the steam mop.
Tool for cleaning corners and tight places with direct steam spray.
Attachment for removing wrinkles from clothing and freshening upholstery.
Tool for cleaning various flat surfaces like countertops and walls.
Button to activate steam flow during operation.
Three distinct settings for different cleaning tasks (Dust, Mop, Scrub).
Button to select and activate the desired steam cleaning mode.
Step-by-step instructions for assembling the steam mop unit.
Guide on how to attach the mop head and fill the water tank.
Crucial advice on surfaces to avoid and using distilled water.
Instructions for plugging in and initiating steam output.
How to choose between Dust, Mop, and Scrub steam modes.
Recommended technique for moving the mop across floors.
Tips for using MOP mode and avoiding accidental trigger activation.
Table detailing ideal surfaces and recommended usage for each steam setting.
Instructions for using the carpet glider for grooming and freshening.
Warnings about suitable surfaces and potential damage to finishes.
Procedure for detaching the handheld unit from the mop body.
Steps to attach, use, and remove the direct steam nozzle accessory.
Guide for attaching and using the garment steamer for fabric care.
Instructions for connecting and using the accessory hose with cleaning tools.
Steps for attaching and using the flat scrubber tool with its pad.
Procedures for cleaning, detaching parts, and storing the steam mop.
Instructions on washing and drying the cleaning pads and bonnets.
Guide to removing mineral deposits from the steam nozzle.
Solutions for when the steam mop fails to power on.
Steps to take if the unit does not produce steam.
Reasons and solutions for water leakage onto the floor.
Troubleshooting for issues with steam activation and indicator lights.
Causes and remedies for white spots left on the floor after steaming.
Addressing issues with floor appearance after steaming.
Solutions for when the steam mop is difficult to maneuver.
Troubleshooting tips for water drops from the nozzle on fabrics.
Information on how to register the product for warranty and safety notifications.
To Next Page