Shark LIFT-AWAY PRO STEAM POCKET MOP User Manual

1
2
(Click)
Please be sure to read the enclosed Owner’s Guide prior to using your unit.
ASSE M B LY
A
Steam Mop Handle
B
Steam Mop Body
C
Removable Handheld
Steamer
D
Intelli-Mop™ Head
E
Dirt Grip™ Pad (x2)
F
Filling Flask
G
Accessory Hose
H
Garment Steamer
I
Small Above-Floor
Pocket Tool and Pad
B
D
C
WHAT’S INSIDE
FILLING THE WATER TANK
REMOVING THE PAD
F
1. Open the water tank cap.
2 . Use the filling flask and pour
water into the tank Do not overfill.
Replace the cap on the water tank.
S3973_QSG_161122
1. Screw the mop handle into the Steam Mop body
(screwdriver not included)
2 . Slide the Intelli-Mop Head post into the Steam Mop
body. Push until you hear it click securely into place.
E
A
TOUCH-FREE TECHNOLOGY
Lift the mop straight up
by the handle until the
Intelli-Mop Head is hang-
ing straight down. Press
down the release buttons
on the sides of the head
post, and both sides of the
mop head will drop open.
CAUTION: It is recommended that you allow the pads to
cool off before removing them from the accessories to
avoid possible scalding injury.
1. Lift the mop straight
up by the handle until
the Intelli-Mop Head
is hanging straight
down. Center the mop
head above the pad.
Press down the release
buttons on the sides
of the head post, and
both sides of the mop
head will drop open.
2 . Slip the mop head’s 4
corner tabs into the 4
corner pockets of the
Dirt Grip™ Pad.
3. Gently press the
Intelli-Mop Head to the
floor on one side of the
pad, and that side will
click into place.
4 . Flip the other side of the
Intelli-Mop Head over
onto the floor to click
into place.
QUICK START GUIDE
LI FT-AWAY
®
PRO STEAM POCKET
®
MOP
With Intelligent Steam Control
®

Shark LIFT-AWAY PRO STEAM POCKET MOP Specifications

General

Brand	Shark
Model	LIFT-AWAY PRO STEAM POCKET MOP
Category	Steam Cleaner
Language	English

Summary

Assembly

Attaching Mop Head Components

Securing the mop handle and Intelli-Mop Head post to the main body of the steam mop.

Filling the Water Tank

Instructions for opening the water tank cap and filling with water.

Touch-Free Pad Technology

Attaching the Dirt Grip Pad

Step-by-step guide on how to attach the Dirt Grip Pad to the mop head.

Removing the Pad

Instructions on how to safely open the mop head to remove the pad.

Steam Blaster Technology

Activating Steam Blaster

How to use the Steam Blaster for extra steam bursts on tough messes.

Stopping Steam Blaster

Instructions on how to stop the Steam Blaster spray.

Cleaning and Steam Control

Initial Setup and Steam Settings

Plugging in the unit and selecting steam settings (LO, HI, Standby).

Intelligent Steam Control Modes

Explanation of steam settings for various sealed surfaces and recommended usage.

Above-Floor Cleaning

Detaching Handheld Steamer

Process for removing the handheld steamer from the main unit.

Accessory Hose Usage

How to attach and use the accessory hose for spot cleaning.

Garment Steamer Usage

How to attach the garment steamer and bonnet for fabric care.

Small Above-Floor Tool Usage

How to attach the small tool and pad for detailed cleaning.