Shark S6002UK User Manual

Please be sure to read the enclosed Shark® instructions prior to using your unit.
ASSEMB LY
1
WHAT’S INSIDE
FILLING THE WATER TANK
1. To open the water tank,
pull the lid down.
2. Use the filling flask to
pour water into the tank.
Make sure not to exceed
the Max Fill Line on the
flask. When finished,
close the tank lid firmly.
1. Insert the steam mop handle into the steam mop body
until it clicks securely into place.
S6002UK_QSG_MP_210322_Mv1
A
Steam Mop Handle
B
Steam Mop Body
C
Dirt Grip™ Pads
D
Filling Flask
BA
C
D
QUICK START GUIDE
STEAM AND SCRUB MOP

Shark S6002UK Specifications

General

Model	S6002UK
Category	Steam Cleaner
Heat Up Time	30 seconds
Weight	1.5 kg
Steam Control	Yes
Accessories	brush, nozzle

Summary

Assembly

Insert Steam Mop Handle

Connect the steam mop handle to the body until it clicks securely into place.

What's Inside

Steam Mop Handle

Component A: The handle of the steam mop unit.

Steam Mop Body

Component B: The main body of the steam mop.

Dirt Grip Pads

Component C: Washable cleaning pads for the mop.

Filling Flask

Component D: Flask for filling the water tank.

Filling the Water Tank

Open Water Tank Lid

Pull the water tank lid down to open it before filling.

Add Water

Use the filling flask to pour water, not exceeding the Max Fill Line.

Dirt Grip™ Pads

Attaching the Pads

Place pads flat with rings up, align indent on nozzle, and lower until secured.

Removing the Pads

Gently pull off pads once they have cooled completely.

Using the Steam Mop

Power Cord and Mode Selection

Unwrap cord, plug in unit, and press mode button for light or normal settings.

Start Cleaning

Place foot on head, pull handle back to engage pads, and mop forward/backward.

Standby Mode and Storage

Press mode button to enter standby, lift handle upright, and unplug.