Shark WANDVAC SYSTEM WS640 User Manual

QUICK
START
GUIDE
CORDLESS 3-in-1
WA N DVAC
®
SYSTEM
PET
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
WS640Series_QSG_MP_220223
WS640
For questions, visit us online
at sharkclean.com/support
Register your vacuum at
registeryourshark.com
CORDLESS 3-IN-1 EMPTYING THE DUST CUP
The brushroll is activated when the hand
vacuum is connected and powered on,
and the handle is tilted back.
UPRIGHT
To detach the floor nozzle, step on the nozzle
while pressing the release button at the
bottom of the wand. Lift the wand to remove
it. Reattach by sliding the wand over the
nozzle neck until it clicks into place.
ABOVE-FLOOR
WAND
ABOVE-FLOOR
HAND VACUUM
With the power o, slide the release button
forward, and the dust cup will swing open. Tap the
dust screen lightly to knock o dust and debris.
Wipe dust screen lightly with a dry cloth
to remove dust and dirt.
1
2
© 2022 SharkNinja Operating LLC. SHARK and WANDVAC are registered trademarks
of SharkNinja Operating LLC. POWERFINS is a trademark of SharkNinja Operating LLC.
To detach the hand vacuum, slide the release
tabs on both sides of the handle and lift it
o the wand. Attach an accessory by sliding
it into the nozzle. To remove the accessory,
slide the release tabs on the handle. To
reattach the hand vacuum, slide the nozzle
over the wand on until it clicks into place.
visit qr.sharkclean.com
/ws640seriesmanual or
SCAN HERE
USING YOUR SMARTPHONE CAMERA
FOR FULL INSTRUCTIONS
& REPLACEMENT PARTS

Shark WANDVAC SYSTEM WS640 Specifications

General

Model Number	WS640
Type	Cordless Stick Vacuum
Battery Type	Lithium-Ion
Filtration	HEPA Filtration
Accessories	Crevice Tool, Dusting Brush
Features	LED Headlights

Summary

Cordless 3-in-1 Operation Modes

Upright Mode Usage

Brushroll activation and handle tilt for upright use.

Above-Floor Hand Vacuum Configuration

Detaching, attaching accessories, and reattaching the hand vacuum.

Above-Floor Wand Configuration

Detaching and reattaching the wand from the floor nozzle.

Dust Cup Maintenance

Emptying and Cleaning the Dust Cup

Steps to open, empty, and clean the dust cup and screen.

Vacuum Components and Assembly

Included Components

Lists all included vacuum parts and accessories.

Assembly Instructions

Step-by-step guide to assemble the vacuum and charging dock.

Power and Charging

Operating the Power

Instructions for turning the vacuum on and off.

Battery Charge Indicators

Explains battery charge indicators during charging and use.

Charging Options

Details upright dock and hand vacuum charging procedures.