Need help?Do you have a question about the Sharp 1640L and is the answer not in the manual?
General| Spindle Bore | 2.047 in |
|---|---|
| Spindle Speed Range | 70-2000 rpm |
| Motor power | 5 hp |
| Swing Over Bed | 16 inches |
| Distance Between Centers | 40 inches |
Essential safety rules to follow before operating the machine.
Illustrated overview of machine parts with labels.
Steps for inspecting the machine upon arrival.
Instructions for safely lifting and positioning the lathe.
Details on electrical wiring, components, and safety.
How to operate the spindle and select speeds.
Importance and method for spindle leveling.
Setting up and using automatic feeding and stops.
Control of leadscrew drive and threading procedure.
Using the thread dial for Imperial leadscrews.
Procedures for oil leaks and spindle bearing adjustment.
Maintenance for apron, saddle, and overload settings.
Diagnosing noise issues in the headstock and gearbox.
Common causes and checks for chatter/vibration.
Adjusting leadscrew backlash and spindle bearings.
To Next Page
