Need help?Do you have a question about the Sharp 1118H and is the answer not in the manual?
Proper foundation and leveling ensure accuracy; use adjustable feet.
Wiring instructions for power source, ground, and spindle direction.
Instructions for lubricating carriage, gearbox, clutch, and headstock.
Instructions for changing spindle speeds using control levers and switches.
How to use the quick change gearbox for feed or thread selection and changing gears.
Step-by-step guide for adjusting collet closer tension and clamping work.
Control lever engages/disengages lead screw for automatic stop at thread end.
Instructions for thread cutting using quick-change gearbox, speeds, and automatic stop.
Detailed steps for setting up outside change gears for inch threads.
Detailed steps for setting up outside change gears for metric threads.
List of parts for the headstock assembly with keys and part numbers.
List of parts for the threading gear box assembly.
List of parts for the collet closer assembly.
List of parts for the bed assembly.
List of parts for the pedestal assembly.
List of parts for the carriage assembly.
List of parts for the cross and compound slide assembly.
List of parts for the tailstock assembly.
Wiring diagram for the 1118H 5HP 220V machine.
To Next Page
General
