Sharp 1118H

CONTENTS
PAGE
PURPOSE OF THIS MANUAL………………………………………….... 1
LEVEL ADJUSTMENT PROCES…………….….…….……..…………... 2
LIFTING MACHINE…………….………………………………….……..... 3
A.) INSPECTION AND CLEANING OF MACHINE………….………… 3
B.) FOUNDATION, INSTALLATION, AND LEVELING………………… 3
C.) ELECTRICAL CONNECTIONS..…………...……………………….. 4
D.) LUBRICATION…………….……………..…….……………………… 5
E.) SPINDLE CONTROL LEVER…………………….…..……………… 6
F.) QUICK CHANGE GEAR BOX…….………..………………………... 7
G.) AUTOMATIC THREAD LENGTH CONTROL….…………………… 8
H.) SPINDLE BRAKE……………………………………………………... 8
I.) BELT ADJUSTMENT…….…………………….…............................. 9
J.) COLLET CLOSER-REMOVAL….……...………..….….……………. 9
K.) COLLET CLOSER-REPLACEMENT…….…….……….…………... 9
L.) COLLET CLOSER-ADJUSTMENT…..……….…..……………....... 10
M.) CARRIAGE INDICATED RING….…….…………………………….. 10
N.) CARRIAGE LOCK.……………………………………………………. 11
O.) CARRIAGE CLUTCHES……………………………………………… 11
P.) CROSS SLIDE INDICATING RING………….………….…………... 11
Q.) QUICK-ACTING TOOL POST COMPOUND SLIDE ASSEMBLY... 12
R.) POWER FEED UNIT……….………….………….……….…………. 13
S.) COOLANT FACILITIES……………………………………………..... 14
T.) TAILSTOCK.................................................................................... 14
U.) TAILSTOCK-SPINDLE LOCK.….…………….………...…………… 14
V.) TAILSTOCK BODY LOCK…….………….………………………….. 14
THREAD CUTTING………………………………………………………… 15
OUTSIDE CHANGE GEARS................................................................. 19
METRIC THREADS USING OUTSIDE CHANGE GEARS…………..... 22
PARTS ASSEMBLY NUMBER…………………………………………….. 30
ELECTRIC CONTROL PARTS&RD………………………………………. 64