Need help?Do you have a question about the Sharp 16 Series and is the answer not in the manual?
Procedure for testing spindle rotation, forward/reverse, and emergency stop.
How to use the three levers to select the desired spindle speed.
Proper use of the intermittent switch for precise spindle positioning.
Crucial steps to adjust spindle leveling to prevent chatter and ensure precision.
Essential steps for setting up and executing threading operations.
Proper use of the thread dial for accurate thread engagement.
Charts providing guidance on selecting thread pitches and feed rates.
Procedures for preventing headstock leaks and adjusting spindle bearings.
Maintenance for apron lubrication, half nut adjustment, and overload settings.
Method for aligning the tailstock centerline using test bars and set screws.
Steps to reduce play in the leadscrew half nut for improved threading accuracy.
Diagnosing and resolving noise issues in the headstock and gearbox.
To Next Page
General
