Sharp 16 Series User Manual

12
Caution: Do not shift gears while spindle is turning. Be certain gears are properly
engaged before starting.
4-4 Intermittent (Inching) Operation of Spindle
For the convenience spindle speed shifting, feeding rate recognition and work
piece center line and adjustment, press the intermittent button ○
9
located on the
right side of the gear box, and the spindle will rotate forward. The spindle will
rotate as long as the intermittent switch is pressed. The intermittent switch cannot
rotate reverse.
○
9
Fig.4-4

Sharp 16 Series Specifications

General

Brand	Sharp
Model	16 Series
Category	Lathe
Language	English