
Do you have a question about the Sharp 20 and is the answer not in the manual?
| Model | Sharp 20 |
|---|---|
| Category | Battery Charger |
| Output Current | 2A |
| Input Voltage | 100-240V AC |
| Compatible Battery Types | AGM, Gel |
| Charging Stages | Bulk, Absorption, Float |
| Protection Features | Overcharge, Short-circuit, Reverse polarity |
Covers general safety, reading instructions, cautions, and intended use.
Covers charger adjustment and steps before starting the charging process.
Warning about explosive gases generated by lead-acid batteries during charging.
Hazardous situations and precautions are presented in the text.
Explains graphical attention symbols that may appear on products and documentation.
Covers warnings regarding high voltage and risk of electric shock.
Notes on situations that may cause damage or injury.
Identifies components of the control panel for Sharp 20 P4 and P6 models.
Step-by-step guide for safely connecting the battery to the charger.
Procedure for safely disconnecting the battery from the charger.
Conditions under which charging is terminated or reduced.
How to interpret LED indicators for charging faults or charger faults.
Recommended checks for cables, connectors, battery, and mains voltage.
Information on how to recycle the battery charger.
Contact details for Micropower Sweden AB.
Guide to selecting correct charging curves based on battery type and capacity.
Diagram showing dimensions for Sharp 20 P4 model.
Diagram showing dimensions for Sharp 20 P4 model.
Diagram showing dimensions for Sharp 20 P6 model.
Diagram showing battery connection to the charger.
Illustration of the control panel and connections for Sharp 20 P4.
Illustration of the control panel and connections for Sharp 20 P6.
Table of charging curves and times for Sharp 20 P4 chargers.
Table of charging curves and times for Sharp 20 P6 chargers.
Confirms the equipment meets Low Voltage Directive, EMC Directive and CE Marking.
Loading...