Do you have a question about the Sharp RP-20 and is the answer not in the manual?
Motor | DC servo motor |
---|---|
Overhang | 15mm |
Type | Belt-drive |
Speeds | 33 1/3, 45 rpm |
Cartridge | Moving magnet type |
Frequency response | 20Hz to 20kHz |
Platter | Aluminum die-cast |
Tonearm | Static balance type |
Combines cautions, warnings, and symbol explanations for user safety.
Covers numbered safety points 1-14 for installation, operation, and cleaning.
Covers numbered safety points 15-24 on power, overloading, and servicing.
Identifies buttons, terminals, and indicators on the main unit.
Steps for powering on, selecting PHONO mode, and managing the stylus guard.
Solutions for common general and USB-related problems.
Step-by-step instructions for replacing the stylus and cartridge.
Completing the installation of a new cartridge by connecting wires and securing it.