
Do you have a question about the Sharp RP-117H and is the answer not in the manual?
| Speeds | 33 1/3 and 45 rpm |
|---|---|
| Signal to noise ratio | 65 dB |
| Tonearm | Static balance type |
| Effective length | 220 mm |
| Overhang | 15 mm |
| Output | 2.5mV |
| Weight | 6.5 kg |
| Type | Belt-drive |
| Motor | DC motor |
| Power Supply | AC 50/60Hz |
| Platter | Aluminum die-cast |
| Cartridge weight range | 4 to 8g |
Steps to remove the outer cabinet of the unit.
Procedure for detaching the turntable cover and operation panel.
Details on the player's buttons and their functions.
Explanation of turntable, tonearm, and record sensors.
Steps to adjust the tonearm's tracking accuracy.
Steps to adjust the indicator for tonearm position detection.
Procedure for adjusting the sensitivity of the APSS sensor.
Loading...