E-10
Listening to a USB mass storage device
Notes:
This product is not compatible with MTP and AAC le
systems from USB mass storage device.
■ USB playback
1 Press the FUNCTION button repeatedly to select USB
function.
USB
2 Insert a USB memory device into the USB terminal.
USB
3 Press the button to start playback.
4 Press the button once to go to the beginning
of the next track.
5 Press the button once to go back to the be-
ginning of the previous track.
6 To pause playback, press button again.
7 To stop playback, press /CLEAR button.
To fast forward :
Press and hold
button. Release the button to
resume playback.
To fast reverse :
Press and hold
button. Release the button to
resume playback.
Notes:
● If USB memory device is not connected, “NO USB” will
be shown on the display.
● Fast forward/reverse is invalid when playing back a
variable bitrate le.
■ To resume playback after stopping
(resume play)
1 During USB playback, press the /CLEAR button
once.
2 To resume play, press the button. Playback re-
sumes from the beginning of the current track.
To cancel the resume playback:
Within 1 second, press the
/CLEAR button twice.
■ Deleting tracks, directory or format
1 During stop mode, press or button to
select the track or directory to be deleted.
2 Press and hold /CLEAR button.
3 Press or button repeatedly to select
DEL ONE, DEL DIR, DEL ALL or FORMAT.
4 Press /CLEAR button twice.
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 les may differ depending on
the writing software used during le download.
● Bitrate which is supported by MP3 is 32~320 kbps.
● Files without MP3 format cannot be played back.
● Playlists are not supported by this unit.
● Total number of folders read is 999 including folder
with non-playable le. However, the display shows
only folder with MP3 les.
● The display playback time may not be displayed
correctly when playing back a variable bitrate le.
RP-20_OM_US_EN_ES_FR.indb 10 2017-12-07 17:36:22