Sharp 27N S50 - Channel Memory Management

28
Set Up (Continued)
L Saving broadcast TV channels into memory.
1.1 Press MENU to access MAIN MENU
screen, then press
CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “SET
UP”.
1.2 Press VOL (+) or (–) to access SET UP
mode, then press
CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
SETTING”.
1.3 Press VOL (+) or (–) to access CH
SETTING mode.
1.4 Press CH UP ( 8 ) or DOWN ( 9 ) to move
the “
” mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
mode.
START
2.1 Press VOL (+) . The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
2.2 Press VOL (–) . CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3 Press MENU to exit.
L Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press MENU to access MAIN MENU
screen, then press
CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “SET
UP”.
1.2 Press VOL (+) or (–) to access SET UP
mode, then press
CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
SETTING”.
1.3 Press VOL (+) or (–) to access CH
SETTING mode, then press
CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
MEMORY”.
→
(START)
(STOP)
(CH SETTING mode)
(CH SETTING mode)
→
→
→
(CH SEARCH mode)
→
→
2.1 Press VOL (+) or (–) to access CH MEMORY.
2.2 Use CH UP ( 8 ) or DOWN ( 9 ) or REMOTE
KEYPAD
to select each desired channel
to add or erase.
2.3 Press VOL (+) to add a channel to the TV’s
memory or press
VOL (–) to erase a
channel from the TV’s memory.
or
26-29 27N-S50 6/1/00, 11:44 AM28