Sharp 27N S50 - Channel Setting: Manual Tuning Options

27
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to
“SET UP”.
3 Press VOL (+) or (–) to access SET UP mode.
4 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to
“CH SETTING”.
5 Press VOL (+) or (–) to access CH SETTING mode.
6 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to the
“AIR/CABLE”, then press
VOL (+) or (–) to access
AIR/CABLE mode.
Set Up (Continued)
→
(CH SETTING mode)
(SET UP mode)
(MAIN MENU screen)
→
→
(CH SETTING mode)
8 Press MENU to exit.
• Receivable channels of your TV set are:
AIR channels: VHF: 2 through 13. CABLE channels: 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
NOTE:
(AIR/CABLE mode)
7 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to the
desired mode.
26-29 27N-S50 6/1/00, 11:44 AM27